WESPC Original GM70CK Diesel Engine Digital Meter Multi-Function
Monitor
Operation Voltage | DC 8～36 V |
| MAX Accumulating Time | 99999.9Hours(Min Store time:6min) |
| Working condition | -25-65℃ |
| Storage condition | -40-85℃ |
| Switch value input | Available if connecting with Battery - |
| Overall dimension | 175mm*128mm*39mm |
| Panel cutout | 152mm*112mm |
| Weight: | 0.5Kg |
Summary
GM70CK is specially designed for the parameter monitoring and fault
monitoring of air compressor driven by diesel engine and gas
engine. It is equipped with standard can communication port and
built-in J1939 protocol. Relevant parameters can be read through
CAN port of engine ECU.
4.3 inch colorful LCD screen display with brand new UI design is
adapted in this meter that the relative failures can be displayed
directly. All the parameters can be displayed by simulated
indicators and words. Besides, LCD screen can display various
faults in the same time that the gen set will be stopped once it
can’t work smoothly.
There are Chinese/English interface options, more language can be
set according to user’s request. All the parameters can be
configured through the front face buttons or use programmable
interface by RS485 or USB to adjust via PC.
Main Features
GM70CK has CAN port, built-in J1939 protocol, alarm protection
function and USB communication port, RS485 communication port,
MODBUS communication protocol compatibility, and air compressor
related parameter measurement, which is dedicated for diesel driven
air compressor.
Dual core 32bit high performance single chip microcomputer.
4.3inch TFT colorful big screen LCD, Available in 3 languages,
user’s language set if necessary.
Indicator and number display through UI surface.
Acrylic material is adapted to protect the screen.
Silicone panels;
USB Port: parameters can be set even without power through USD port
to monitor in real time.
With RS485 communication port, can achieve "Three Remote" functions
via MODBUS protocol.
Standard CAN communication port, built-in J1939 protocol.
Various kinds of parameters display.
Input/output function, status can be shown directly.
More categories of surface setting.
Protection countdown function;
Real time clock inside ;which can set the maintenance time or date.
The black box function can save the relevant parameters of the unit
when the fault alarm occurs in real time, and it is convenient to
find the cause of the fault.
Totally 3 relay’s output, among which 3 relay output can be
self-configurable, each relay can be set with multiple functions,
besides, there are 2 groups as non-contact terminals.
With 4 switches input, can be set with multiple functions.
6 sensor simulation input connectors, 1/2/3/4Configurable sensor
compatible R/U/I sensor type; various kinds of units can be set.
Sensor can be self-defined by front face button or PC software.
Standard water-proof rubber gasket. The waterproof can reach IP54.
Module design: All the connections are adapted with European
connectors so that installation, connection, repair and replacement
can be more easily.
Limited time use function.
